Feedlink Revvo Kit Product Specification
Revvo Boost Tank
- Bottom fill version of the Revvo – filling is via the squonk pin only
- Adjustable airflow
- 2ml capacity
- Aspire Radial Coil
- Coil Resistance 0.1 – 0.14ohm
- Wattage 70-80W via Feedlink mod
- 24mm diameter
- 41mm height
Aspire Feedlink Mod
- H:87mm x W:29mm x D:43mm
- Output Voltage: 3.0-4.2V
- Resistance Range: 0.1 – 3.5ohm
- 7ml bottle capacity
- Two colour LED indicator under the firing button
What’s in the box?
- 1 x Feedlink Mod
- 1 x 2ml Revvo Boost Tank
- 2 x Revvo Boost ARC coils
- 1 x Spare Glass
- 11 x O-rings
- Warning Card
- User Manual
- Warranty Card
- Automatic cut off: Max firing time of 10 seconds. After 10 seconds the mod will stop firing and the LED indicator will flash 10 times.
- Short circuit protection: If a short is detected the LED indicator will flash 2 or 3 times.
- Over discharge protection: If the battery falls below 3.2V the LED indicator will flash orange 15 times.
- Overheat protection: If the control board in the mod reaches 75 degrees Celsius the mod will shut off and the LED indicator will flash blue and orange for 3 seconds.
- Battery reverse protection: The mod won’t fry if you put your battery in the wrong way around. The battery bottom cap does have a negative indicator on it so insert your 18650 positive side first.
Comes with a single Sigelei 35A 2500mAh 18650 Battery Set (giving you a £9 saving). This set includes:
1 x Sigelei 35A 2500mAh 18650 Battery
1 x Battery Case