Aspire Feedlink Revvo Kit

(No reviews yet) Write a Review
Usually ships within 24 hours
Calculated at Checkout



Feedlink Revvo Kit Product Specification


Revvo Boost Tank

  • Bottom fill version of the Revvo – filling is via the squonk pin only
  • Adjustable airflow
  • 2ml capacity
  • Aspire Radial Coil
  • Coil Resistance 0.1 – 0.14ohm
  • Wattage 70-80W via Feedlink mod
  • 24mm diameter
  • 41mm height



Aspire Feedlink Mod

  • H:87mm x W:29mm x D:43mm
  • Output Voltage: 3.0-4.2V
  • Resistance Range: 0.1 – 3.5ohm
  • 7ml bottle capacity
  • Two colour LED indicator under the firing button



What’s in the box?

  • 1 x Feedlink Mod
  • 1 x 2ml Revvo Boost Tank
  • 2 x Revvo Boost ARC coils
  • 1 x Spare Glass
  • 11 x O-rings
  • Warning Card
  • User Manual
  • Warranty Card



Safety Features

  • Automatic cut off: Max firing time of 10 seconds. After 10 seconds the mod will stop firing and the LED indicator will flash 10 times.
  • Short circuit protection: If a short is detected the LED indicator will flash 2 or 3 times.
  • Over discharge protection: If the battery falls below 3.2V the LED indicator will flash orange 15 times.
  • Overheat protection: If the control board in the mod reaches 75 degrees Celsius the mod will shut off and the LED indicator will flash blue and orange for 3 seconds.
  • Battery reverse protection: The mod won’t fry if you put your battery in the wrong way around.  The battery bottom cap does have a negative indicator on it so insert your 18650 positive side first.



Comes with a single Sigelei 35A 2500mAh 18650 Battery Set (giving you a £9 saving). This set includes:

 1 x Sigelei 35A 2500mAh 18650 Battery

 1 x Battery Case





Videos Hide Videos Show Videos